Where Appearance Fails, Geometry Recognizes: A CAD-Free 3D Shape Prior That Complements Vision Foundation Models

2026-09-03

AI Summary

该研究针对无标签训练集的特定物体识别问题，通过3D高斯点云重建和形状原型融合方法，补充了视觉基础模型，尤其在几何相似、低纹理工业部件上有效。

Abstract

Recognizing specific objects onboarded without a labeled training set recurs across manufacturing and service robotics, yet the conventional renderable prior, a computer-aided-design (CAD) model, is often unavailable. Two-dimensional capture supplies no shape prior, and frozen foundation features fail on geometrically similar, low-texture industrial parts. We ask what a short object-centric scan buys for recognition beyond the captured images themselves: each object is reconstructed with 3D Gaussian Splatting (3DGS), summarized into a per-class shape prototype, and fused with frozen DINOv2 image features. First, the scan recovers the recognition value of CAD without CAD: geometry from RGB-D depth (on T-LESS), 3DGS, and CAD gives comparable recognition (tied on HOPE, within 1.6 points on T-LESS); 3DGS is only a convenient route to a point cloud. Second, the payoff is governed by how recognizable the shape is: on shape-distinctive household objects (HOPE) geometry alone reaches 0.920 versus image-only 0.832, a ceiling below which fixed-weight fusion (0.872) sits. On shape-confusable textureless industrial parts (T-LESS) the gain is modest but consistent (0.560 to 0.591 fused, above both single signals). Third, the prior is complementary, not uniformly additive: it rescues far more image failures than it breaks successes, and its benefit grows under partial occlusion. Finally, the worth lies in geometry, not rendered pixels: 3DGS renderings do not help the image side, and frozen-feature recognition is nearly lighting-invariant (within 2.5 points). The study is scoped to recognition, not the BOP pose benchmark.

Problem

• CAD-free
• 3D shape prior
• object recognition

Innovation

• 3D Gaussian Splatting
• shape prior
• frozen DINOv2 features
• object recognition
• RGB-D depth